91mm Victorinox Parts Reference
This page is a reference of all original parts used by Victorinox on their 91mm knives. It is not necessarily complete and there may be errors. It is designed to support modders.
If you notice an error or omission, please get in contact.
Take dimensions and information at your own risk.
Not all items are shown by default.
Please use the filters on the right to display certain components or groups of components.
Victorinox SAK 91mm Component Filters
To see how the models are made up with these components, please click here. (Coming Soon!)
Bottle Opener / Flat Head
The bottle opener tool has three tools in one. Firstly the bottle opener, secondly the flat head screwdriver and thirdly the wire stripper. The pivot hole is just slightly larger than 2.5mm.
The tool is approximately 2mm thick at the tang as is smaller than the 93mm Alox equivalent. There is also a nail nick on one side.
The bottle opener tool has three tools in one. Firstly the bottle opener, secondly the flat head screwdriver and thirdly the wire stripper. The pivot hole is just slightly larger than 2.5mm.
The tool is approximately 2mm thick at the tang as is smaller than the 93mm Alox equivalent. There is also a nail nick on one side.
Combi Tool
Cybertool
Fine Screwdriver
There have been two versions of this tool over time. It is a very small flathead screwdriver. The more modern version has a finer tip but a curved area around the nail nick.
There have been two versions of this tool over time. It is a very small flathead screwdriver. The more modern version has a finer tip but a curved area around the nail nick.
In-line Phillips Screwdriver - New
Inner Pins
LED Torch
Liner 1 - (Corkscrew/Phillips)
This liner has the cut out for the Corksrew or Rear Phillips and matches the profile of the Cellidor Scale. The liner is not uniformly flat and has been press made.
It is approximately 0.8mm thick.
This liner has the cut out for the Corksrew or Rear Phillips and matches the profile of the Cellidor Scale. The liner is not uniformly flat and has been press made.
It is approximately 0.8mm thick.
Liner 12 - LED / Phillips In Line
Liner 14 - Traveller
Can Opener / Small Flat Head
The can opener tool has two tools in one. Firstly the can opener and secondly the small flat head screwdriver. The pivot hole is just slightly larger than 2.5mm.
The tool is approximately 2mm thick at the tang as actually the same profile as ithe 93mm Alox equivalent, however the Alox equivalent is thicker. There is also a nail nick on one side.
The can opener tool has two tools in one. Firstly the can opener and secondly the small flat head screwdriver. The pivot hole is just slightly larger than 2.5mm.
The tool is approximately 2mm thick at the tang as actually the same profile as ithe 93mm Alox equivalent, however the Alox equivalent is thicker. There is also a nail nick on one side.
Corkscrew
This tool is the classic Corkscrew, originally it was fluted along the outside edge of the spiral, but this was removed during the 1990s to ease manufacture.
This tool is the classic Corkscrew, originally it was fluted along the outside edge of the spiral, but this was removed during the 1990s to ease manufacture.
Cybertool Bit Holder
Fishscaler
Inline Phillips Screwdriver - Old
Keyring Spacer
This keyring spacer fits against the small blade on the inner side next to the liner. This is important to ensure that the large and small blades do not interfere with each other.
It is approximately 1mm thick.
This keyring spacer fits against the small blade on the inner side next to the liner. This is important to ensure that the large and small blades do not interfere with each other.
It is approximately 1mm thick.
Large Blade
The small blade is approximately 39mm in length and has a nail nick on one side, with a curved end with a uniform blade grind. The tang is approximately 2.4mm thick.
An excellent way to date your Swiss Army Knife is by studying the Tang Stamps and using the array of excellent online guides.
The small blade is approximately 39mm in length and has a nail nick on one side, with a curved end with a uniform blade grind. The tang is approximately 2.4mm thick.
An excellent way to date your Swiss Army Knife is by studying the Tang Stamps and using the array of excellent online guides.
Liner 11 - Cybertool
Liner 13 - Old
Liner 15 - Voyager